-40%

Brand New Termovap Nitrogen Sample Concentrator NDK200-2 RT.+5~150ºC 200W ak

$ 414.86

Availability: 27 in stock
  • UPC: Does not apply
  • Condition: New
  • Restocking Fee: No
  • Brand: Unbranded
  • Item must be returned within: 30 Days
  • EAN: Does not apply
  • Return shipping will be paid by: Buyer
  • MPN: Does not apply
  • All returns accepted: Returns Accepted
  • Refund will be given as: Money Back

    Description

    Brand New Termovap Nitrogen Sample Concentrator NDK200-2 RT.+5~150ºC 200W
    Introduction:
     
     
    NDK200-2 nitrogen concentrator is mainly used for enrichment of large-volume sample or preparation (such as drug screening, hormone analysis, liquid phase, and mass spectrometry in the analysis of sample preparation). Working principle: the nitrogen into the heated surface of the sample and make the solvent t evaporate and separated rapidly, thereby reaching the sample enrichment purpose without oxygen, keep the sample purer. Nitrogen concentrator instrument can concentrated dozens of samples simultaneously, saving time and high efficient, instead of rotary evaporation instrument. 
     
    Features:
    1, The heater allows samples to be heated rapidly to the evaporation temperature, through the gas blow to the solution surface via needle at the same time, prompting rapid evaporation and concentration solution.
    2, Gas needle position in the gas chamber can be changed, suitable for various kinds of tubes.
    3, The gas chamber height can be adjusted, the length of standard gas needle is 150mm.
    4, Equiped with 12 gas control switch ,no waste of gas.
    5, The entire system can be arranged in the ventilation cabinet when process concentration of toxic solvents.
    6, Built in over-temperature protection device, automatic fault detection and alarm function.
    7, LED display, temperature and time diminishing display, the operation is simple and convenient.
    8, configured standard gas chamber and special adjustable bracket.
    2.Specificaton:
    Model
    NDK200-1
    nitrogen concentrator
    NDK200-2
    nitrogen concentrator
    Temperature range
    RT+
    5
    º
    C
    to
    150
    º
    C
    Heating time
    ≤30min

    from
    40
    º
    C
    to
    150
    º
    C
    )
    Temperature accuracy(40~
    100
    º
    C
    )
    ±
    0.5
    º
    C
    Temperature accuracy(100~
    150
    º
    C

    ±
    1
    º
    C
    Temperature uniformity
    º
    (
    100
    º
    C)
    ±
    0.5
    º
    C
    Blocks Quantity
    1 pieces
    2 pieces
    Time range
    99h59min
    Nitrogen flow
    0—
    10L
    /min
    Nitrogen pressure
    ≤0.1MPa
    power
    200W
    400W
    Dimensions
    265x200x
    500 mm
    280x220x
    500 mm
    Blocks Selection
    Refer to the “blocks replacement for NDK Series”
    Conventional configuration:
     
     
    The user can select the blocks from DT01A - DT18, blocks can be interchanged, and conventional configuration is DT06 blocks. Optional flow regulating valve. 
     
    Blocks replacement for NDK Series.
    Type
    Tube diameter
    Tubes
    Block size (mm)
    DT
    01A(
    .6
    )
    6 mm
    24
    95.5X76.5X50
    DT
    02A(
    .6
    )
    7 mm
    24
    95.5X76.5X50
    DT03(
    .6
    )
    10 mm
    20
    95.5X76.5X50
    DT04(
    .6
    )
    12 mm
    20
    95.5X76.5X50
    DT05(
    .6
    )
    13 mm
    20
    95.5X76.5X50
    DT06(
    .6
    )
    15 mm
    12
    95.5X76.5X50
    DT07(
    .6
    )
    16 mm
    12
    95.5X76.5X50
    DT08(
    .6
    )
    19 mm
    12
    95.5X76.5X50
    DT09(
    .6
    )
    20 mm
    6
    95.5X76.5X50
    DT10(
    .6
    )
    26 mm
    6
    95.5X76.5X50
    DT11(
    .6
    )
    28 mm
    4
    95.5X76.5X50
    DT12(
    .6
    )
    40 mm
    4
    95.5X76.5X50
    DT
    13A(
    .6
    )
    0.5 ml centrifugal tube
    24
    95.5X76.5X50
    DT14(
    .6
    )
    1.5 ml centrifugal tube
    24
    95.5X76.5X50
    DT15(
    .6
    )
    2.0 ml centrifugal tube
    24
    95.5X76.5X50
    DT16(
    .6
    )
    0.2ml
    96
    95.5X76.5X50
    DT17(
    .6
    )
    Plate(no holes)
    96 hole enzyme plates
    78X114X26
    DT18
    customized
    customized
    81X123X19
    Notice.
    Flow regulating valve: .5.
    Wed, 27 May 2020 22:47:59 GMT 637262452792985993 D8C7034A4D570369
    SALES POLICY:
    Your bid is a contract: place a bid only if you're serious about buying the item. If you are the winning bidder, you will enter into a legally biding contract to purchase the item. If payment is not received within 7 days, item may be offered to the next highest bidder or relisted at the seller's sole discretion.
    RETURN POLICY :
    We offer 90 days(used) or 180 days(new) free warranty (except consumables).we stand behind every product we sell.If you're not pleased with your purchase, we'll be happy to make an exchange or refund the product price less S&H within 7 days of your purchase. For any exchange or refund, we need the original receipt or a record of the purchase in our system, and the product must be in its original condition, including the box, packaging and all accessories. Shipping and handling charges are not refundable.
    International Buyers:
    We are NOT responsible for any custom duty or import tax. However, we will try our best to minimize it.
    Wir sind NICHT für irgendeine Zollgebühr oder Importabgabe verantwortlich.
    Nous ne sommes pas responsables de tout droit de douane ni taxe d'importation.
    About US:
    We are professional EBAY sales team and lots of ebay buyers very satisfied with our services. You can enjoy top-quality product and high-quality services from us.
    payment :
    Shipping :
    Best
    Customer Service
    Prompt
    Delivery
    100% Money Back
    Guarantee
    Easy & Secure
    Payments