USA Lab 50L Dual Setup Explosion Proof Rotary Evaporator Turnkey System

Description

*** 2 week lead time ***
waiting for chillers -   Rotovap and pump are in stock
The USA Lab 50L EXRDS Series rotary evaporator turnkey system recovers solvents
efficiently
and
fast
with
two times the surface area for condensing
and
twice the recovery volume
.
Our
EXRDS series evaporator is an
explosion proof
evaporator with
brush-less motors
and
enclosed internals
to prevent any flammable / explosive material from touching the internals via seals.
This unit provides consistent and repeatable results at an
affordable price.
With
dual condensers
and
dual receiving flasks
made of
GG-17 High Borosilicate Glass,
all pieces have been designed for
efficient
use of surface area,
higher capacity's
and
higher recovery rates
. This means
faster recovery
without compromising
quality
. Our evaporators come standard with safety features such as
over-temperature shut off
and
dry-run protection
. All valves and ports are
high efficiency
allowing a
continuous feed
of material as well as draining the receiving flask without breaking vacuum.
This turnkey system comes equipped with
two of our 50L DLSB-50/30 -30°C chillers
, providing low temperatures and high flow rates for each condensing set-up. This allows for
higher recovery rates
than a single condenser set-up or using one chiller on two condensers. Our turnkey set-up also comes equipped with one of the
highest quality diaphragm pumps made by Vacuubrand
. The MD 4C NT 2.2CFM pump is rated for
15,000 hours maintenance free
and provides a superior vacuum with an oil-free, corrosion resistant system.
No expense has been spared with these evaporators, yet we
crush the market
on pricing to provide
great value
at a
low cost.
Our evaporators are the
best value
on the market and each one comes with
fantastic customer service
,
local product support
and a
1 year warranty.
This Kit Includes the Following:
1pc:
EXRDS-1050 50L Explosion Proof Rotary Evaporator with Dual Condenser Set-up
2pcs:
DLSB-50/30 50L -30° Chillers
1pc:
Vacuubrand MD 4C NT 2.2CFM Chemistry Diaphragm Vacuum Pump
2pcs:
5 Gallons of Propylene Glycol USP
2pcs:
10ft Vacuum Hose
2pcs:
11ft Insulated Chiller Line
EXR-1050 DC SPECIFICATIONS
•
Glass Material:
GG-17 Borosilicate Glass
•Evaporation Flask Capacity:
50L
•Collection Flask Capacity:
20L
•Rotary Speed:
20-120RPM
•Bath Temperature Range:
Room Temp to 180°C /356°F
•Lifting Mechanism:
Electric
•Power Requirements:
220V 60Hz 30A Single Phase
•Temperature Control Accuracy:
+/-1°C
•Motor Wattage:
250W
•Heater BTUs:
22,000BTU
•Achievable Vacuum:
399.9Pa
•Evaporating Capability:
Water≥13L/H; Alcohol≥27L/H
•Water Bath Volume:
77L
•Dimensions:
52"L x 45"W x 84"H
•Condensing Volume:
Main: 0.91
㎡
x2; Auxiliary: 0.52
㎡ x2
•Speed Regulation:
Digital Step-Less
•Vacuum Barb:
13.3MM
•Condenser Barb:
15.5MM
PACKING LIST
USA Lab 50L EXR-1050 Rotary Evaporator Base
1 set
50L Bath Cover
1 pc
Main Condenser
2 pcs
Auxiliary Condenser
2 pcs
50L Boiling Flask
1 pc
20L Receiving Flask
2 pcs
50L Flask Cover
1 pc
Four-Way Bump Trap
1 pc
Vapor Duct with Seal (Pre-Installed)
1 set
PTFE Vacuum Sealing Kit (Pre-Installed)
1 set
Glass Vacuum Port with PTFE Valve
6 sets
Glass Feeding Tube with PTFE Valve
2 sets
PTFE Feeding Tube Extension Hose
1 pc
Vertical Stand
2 pcs
Vacuum Gauge
1 pc
Support Ring
4 pcs
Rubber Strap for Condenser
2 pc
Clamp with PTFE Gasket
16 sets
Evaporating Flask Screw Aid
1 pc
Allen Key
2 pcs
63A Fuse
1 pc
Screw Nuts for Clamps
2 pcs
Springs for Clamps
2 pcs
Gasket for Clamps
4 sets
3oz. Vacuum Grease
1 pc
Vacuum Hose
10ft.
MD 4C NT
Three-stage chemistry-design diaphragm pumps are an excellent solution for continuous, oil-free pumping of corrosive gases and vapors and meet even challenging requirements. The three-stage design provides the advantageous combination of high pumping speed and very low ultimate vacuum. All parts of the MD 4C NT in contact with pumped media are made of chemically resistant fluoroplastics. Well-proven PTFE sandwich diaphragms provide increased reliability and extended operating life. Due to the gas ballast valve and its very good ultimate vacuum (even with gas ballast) the MD 4C NT is also suitable for pumping condensable vapors of high-boiling solvents. The NT-series features further improved performance data, easy service and superior vapor tolerance.
Performance features
outstanding chemical resistance and superior vapor tolerance
exceptionally high performance even at low vacuum
excellent ultimate vacuum even with gas ballast
whisper quiet and very low vibration
long diaphragm life, maintenance-free drive system
Technical data
Technical data
Unit
MD 4C NT
Number of heads / stages
4 / 3
Max. pumping speed at 50/60 Hz
m3/h
3.4 / 3.8
Max. pumping speed at 50/60 Hz
cfm
2.0 / 2.2
Ultimate vacuum (abs.)
mbar/torr
1.5 / 1.1
Ultim. vac. (abs.) with gas ballast
mbar/torr
3 / 2.2
Ambient temperature range (operation)
°C
10 - 40
Ambient temperature range (storage)
°C
-10 - 60
Max. back pressure (abs.)
bar
1.1
Inlet connection
Hose nozzle DN 8-10 mm
Outlet connection
Hose nozzle DN 8-10 mm
Rated motor power
kW
0.25
Rated motor speed at 50/60 Hz
min-1
1500/1800
Degree of protection
IP 40
Dimensions (L x W x H)
mm
325 x 243 x 198
Weight
kg
14.3
Noise level at 50 Hz, typ.
dBA
45
NRTL certification
Canada and the USA
ATEX conformity (only 230V)
II 3/- G IIC T3 X Internal Atm. only
Items supplied
Pump completely mounted, ready for use, with manual.
Accessories
Rubber vacuum tubing DN 8 mm (20686001)
MD 4C NT - Pumping speed graph at 50 Hz
MD 4C NT - Pump down graph at 50 Hz (10 l volume)
MD 4C NT - Pumping speed graph at 60 Hz
MD 4C NT - Pump down graph at 60 Hz (10 l volume)
-Technical data are subject to change without notice-
MD 4C NT - Dimension sheet
We ship all glassware products with additional care, but sometimes they arrive
broken
. If glassware arrives broken, please contact us within 3
days
of receiving your product and we will either send you a brand new piece or send you a refund!
Any glassware broken after delivery voids all warranties.
Thank you for understanding!
1 Year parts and labor warranty included.
Does not include glassware.
For Technical Support, Questions, or Other Issues Please Email or Call Us!
USA Lab Equipment
Livonia, MI 48150